COMPANY ORGANISATION

EXECUTIVE ENGINEERS

• IR. NG SIN CHIE

SENIOR STRUCTURE ENGINEER

DIPLOMA CIVIL ENGINEERING, UTM.

B.SC.(Hons.) CIVIL ENG.U.K.

REGISTERED PROFESSIONAL ENGINEER, (P.E.)

CORPORATE MEMBER OF IEM, (M.I.E.M)

28 YEARS of EXPERIENCE

• IR. NG SIN FOOK

SENIOR HYDRAULIC & HYDROLOGY ENGINEER

BACHELOR OF ENGINEERING, CIVIL,

UNIVERSITY OF SINGAPORE

REGISTERED PROFESSIONAL ENGINEER, (P.E.).

CORPORATE MEMBER OF IEM, (M.I.E.M)

37 YEARS OF EXPERIENCE

• IR. DZULKIFFLI BIN IBRAHIM

SENIOR CIVIL ENGINEER

DIPLOMA IN CIVIL ENGINEERING, UTM

BACHELOR OF SCIENCE (Hons) ENG, U.K.

REGISTERED GRADUATE ENGINEER

GRADUATE MEMBER OF IEM

GRADUATE MEMBER OF ROAD ENGINEERS

ASSOCIATION, MALAYSIA.

28 YEARS OF EXPERIENCE

TECHNICAL ADVISORS

• ENGR. NG LEAN CHANG, BILL

TECHINICAL ADVISOR

BACHELOR OF ENGINEERING, AUSTRALIA

MASTER IN BUSINESS ADMINISTRATION.

39 YEARS OF EXPERIENCE

• IR.NG SIN LOK

SENIOR GEOTECHNICAL ENGINEERING

B.ENGINEERING, (1ST CLASS HONS.), UM.

REGISTERED PROFESSIONAL ENGINEER, (P.E.)

REGISTERED CHARTERED ENGINEER, (C.E.)

CORPORATE MEMBER OF IEM, (M.I.E.M)

CORPORATE MEMBER OF ICE, (M.I.C.E.)

34 YEARS OF EXPERIENCE

List of Projects Reference (PHOTO-3)

2-Storey Office and Factory at Bukit Minyak Industrial Estate

2-Storey Office and Factory at Bukit Minyak Industrial Estate, for Rinda Perusahaan Makanan

3-Storey Office and Factory at Bukit Minyak Industrial Estate, for Pan North Plastic Industries

2-Storey Office and Factory at Bukit Minyak Industrial Estate, for Shuen Seng [M] S/B

2-Storey Office and Factory at Bukit Minyak Industrial Estate, for Shin Hua S/B

2-Storey Office and Factory at Bukit Minyak Industrial Estate, for Shin Hua S/B

2-Storey Office and Factory at Bukit Minyak Industrial Estate, for M/s Rainno S/B

3-Storey Office and Multi-Purpose Hall, Butterwroth for M/s Tan Si Eng Chuan Tong

List of Projects Reference (PHOTO-2)

5-Storey Low Cost Flat, Taman Pandan Indah, Butterworth for Kemajuan Baidury Sdn Bhd.

5-Storey Low Cost Flat, Taman Pandan Indah, Butterworth for Kemajuan Baidury Sdn Bhd.

3-Storey Terrace House, At Taman Bagan Baru, Butterworth

Multi-Purposes Hall At Universiti Udara Malaysia, Sintuk, Kedah Darulaman

4-Storey Building with Wide Span Hall at 1st Floor Mak Mandin, Butterworth for Butterworth Buddish Association

8-Storey Apartment & 5 Unit 3 Storey Shop/Office , Jalan Bagan Lallang, Butterworth for Chye Seng Group of Companies

3-Storey Office and Factory At Simpang Empat, Seberang Perai Selatan for M/s O.G. Textiles Sdn Bhd

4-Storey Complex with Basement Carpark At Sentul Perdana, BandarBaru Sentul For Dewan Bandaraya Kuala Lumpur

2-Storey Shop/Office, Pusat Bandar Nibong Tebal, For Eden Gourmet Market S/B

10-Storey Apartment, Tmn Tanjung, Butterworth for TEchnic Development S/B

702 Units, 2 Block, 23-Storey Apartment at Sentul Perdana, K.L. for GKM wilayah Prescon S/B

Twin Columns Canopy At Town of Bukit Mertajam for Hock Teik Cheng Sin Temple

7-Storey Office Block at Jalan Kebun Sireh Bukit Mertajam for Wisma UMMO

10-Storey Apartment & 3-Storey Shop/Office Tmn Tanjung Indah, Butterworth for M/s Technic Development S/B

2-Storey Terrace Houses Scheme at Jalan Raya Uda, Butterworth for Technic Development S/B

4-Storey Commercial Complex with Basement At Bukit Mertajam, For M/s Hock Teik Cheng Sin Temple

List of Projects Reference (PHOTO)

2-Storey Office and Factory at Bukit Minyak Industrial Estate, Seberang Perai

Tayarmart Vehicle Service Centre at Jara Raya Uda, Butterworth

2-Storey Office and Factory At Bukit Minyak Industrial Estate, Seberang Perai for UWC Sdn Bhd

2-Storey Office and Factory at Bukit Minyak Industrial Estate, Seberang Perai for M/s Hup Heng Sdn Bhd

2-Storey Office and Factory At ACKU Industrial Estate, Bagan Lallang, Butterworth for Wah Mah Chemical Sdn Bhd

2-Storey Office and Factory at ACKU Industrial Estate, Bagan Lallang, Butterworth for Yeh Chang Heat Treatment Sdn Bhd

5-Storey Office Block, Jalan Bagan Luar, Butterworth for Zheng De Mai S/B

2-Storey Office and Factory at Simpang Empat, Seberang Perai, for M/s Yen Her S/B

5-Storey Shopping Complex with Basement at Bukit Mertajam for Looking Good Supermarket

3-Storey Shop/Office, Jalan Permatang Rawa, Bukit Mertajam for Zues Development S/B

7-Unit Light Industry Building, Permatang Tinggi for Gold Plate Development S/B

5-Storey Apartment, Taman Janggus, Juru for Zheng De Mai S/B

RUMAH KEDAI DUA TINGKAT ( 30 Unit )

2-Storey Office and Factory at Bukit Minyak Industrial Estate for Kamen Steel Industry S/B

2-Storey Office and Factory, Bukit Minyak Industrial Estate for Skilcraft Industry S/B

5-Storey Low Cost Flat, Jalan Raya Uda, Butterworth for Kemajuan Baidury S/B

Introduction

Jurucita Consultant (Perunding Jurucita) was originally formed in early 1986 in BUTTERWORTH, Penang, MALAYSIA major in the provision of geotechnical, civil & structural, sanitary & plumbing engineering consultancy services. It also undertakes project management services together with its associate professional firms. It was originally managed by two partners who are also brothers, namely, Ir. Ng Sin Lok and Ir. Ng Sin Chie.

Our branch office was also set up in Kuala Lumpur, MALAYSIA in the Middle of year 1990 to PROVIDE EVEN BETTER services for projects in the surrounding area.

Services

Since establishment, the firm have undertaken various projects mainly from the private sectors. The professional services rendered by the firm for these projects can be summarised briefly as follows :-

1. Preparation of design calculations and drawings for both steel structure and reinforced concrete structure for submission and construction.

2. Preparation of hydraulic calculations and road & drainage plans to the requirements of the relevant local authorities, i.e. JKR, JPS and Town Council.

3. Preparation of sewer reticulation and sanitary installation plans, design of sewage treatment plant for both aerobic and anaerobic system.

4. Preparation of water supply, water reticulation and plumbing plans. Design of water reservoir and elevated water storage tank.

5. Design and preparation of plans for industrial buildings, i.e. factory, warehouse, godown, light industry scheme and workshop.

6. Design and preparation of earthwork plans for both cutting and filling area.

7. Provision of periodic as well as full time site supervision.

8. Preparation of tender documentation and management of project contract.

9. Turnkey Projects.

The rendering of professional services by the firm will adhere to the recommendations and acts of The Board Of Engineers, Malaysia and The Institutions Of Engineers, Malaysia. The normal professional services to be rendered by the firm as recommended are as follows :-

a. Preliminary Stages.

The professional services to be provided at this stage include :-

1. Investigating data and information relevant to the works and considering any reports relating to the works;

2. Advising the client on making any further topographical survey of the proposed site of the works which may be necessary to supplement available topographical information;

3. Advising the client on the need to carry out any geotechnical investigation which may be necessary to supplement the available geotechnical information, arranging for such investigation, certifying the amount of any payments to be made by the client to the persons, firm or companies carrying out such investigation under the consulting engineer's direction, and advising the client on the results of such investigation;

4. Advising the client on the need for arrangements to be made, for the carrying out of special surveys; special investigations or model tests and advising the client of the results of any such surveys, investigations or tests carried out;

5. Consulting any architect appointed by the client in connection with the architectural treatment of the works; and

6. Preparing such reports and documents as are reasonably necessary to enable the client to consider the consulting engineer's proposals, including alternatives for the construction of the works in the light of the investigations carried out by him at this stage, and to enable the client to apply for approval in principle of the execution of the works in accordance with such proposals.

b. Design Stage

The professional services to be provided by the consulting engineer at this stage include :-

1. Preparing designs and tender drawings in connection with the works, including bar bending schedules, if required; and

2. Preparing such conditions of contract, specifications, schedule and bills of quantities as may be necessary to enable the client to obtain tenders or otherwise award a contract for carrying out the works.

c. Tender Stage

The professional services to be provided by the consulting engineer at this stage advising the client as to the suitability for carrying out the works of the persons, firm or companies tendering and as to the relative merits of tenders, prices and estimates received for carrying out the works.

d. Construction Stage

The professional services to be provided by the consulting engineer at this stage include:-

1. Advising on and preparing normal contract documents, including letter of acceptance for carrying out the works or part thereof;

2. Inspecting and testing during manufacture and installation such electrical and mechanical materials, machinery and plant supplied for incorporation in the works as are usually inspected and tested by consulting engineers, and arranging and witnessing acceptance test;

3. Advising the client on the need for special inspection or testing other than that referred to above;

4. Advising the client on the appointment of site staff in accordance with paragraph 3 of above;

5. Preparing any further bar bending schedules, designs and drawings;

6. Examine and approving the contractor's proposals and working drawings;

7. Making such visits to site as the consulting engineer shall consider necessary to satisfy himself as to the performance of any site staff appointed pursuant to paragraph 3 of this Part and satisfy himself that the works are executed generally according to contract and otherwise in accordance with good engineering practice;

8. Giving all necessary instructions to the contractor;

9. Issuing all certificates as required in the contract;

10. Performing any duties which the consulting engineer may be required to carry out in any contract for the execution of the works;

11. Delivering to the client on the completion of the works such records and manufacturer's manual as are reasonably necessary to enable the client to operate and maintain the works; and

12. Deciding any dispute or difference arising between the client and the contractor and submitted to the consulting engineer for his decision, provided that this professional service shall not extend to advising the client following the taking of any step in or toward any arbitration or litigation in connection with the works.

The firm is bound by the constitutions, by-laws and regulations of the Institution and the Board of Engineers for provision of professional services. All projects undertaken were precisely scrutinised, designed and carry out accordingly; bearing in mind the safety, health and economy of the society

Other services

1. Project Management for property development projects, industrial projects, commercial projects, housing scheme and etc. Application for land conversion and subdivision, application of project loan and finance, construction and supervision, sale and marketing, agreement and legal advice.

2. Design of prestressed concrete structure; prestressing and post tensioning system, rock and ground anchoring system,

3. Design of Micro Piling system.

4. Design and construction of gunniting, slope protection system.

5. Design and preparation of geotechnical report.

6. Contract management.

7. Computer Aided design and drafting.

8. Turnkey Projects.